Raw material is selected from characterised zones of established deposits across Gujarat, Rajasthan, Madhya Pradesh and Tamil Nadu, so each grade begins with consistent chemistry.
ISO 9001 processes and NABL-accredited testing against the parameter that matters to you — from API 13A rheology to bleaching activity — reported on a batch CoA.
Bags, jumbo bags or private label, with TDS, MSDS and export documents prepared for customs and your incoming QC.
16 products and 54 application-specific grades across two divisions.
Precision-milled clays, carbonates and functional minerals for drilling, foundry, ceramics, coatings, agriculture and filtration.
Activators, catalysts, moisture scavengers and rheology additives engineered for rubber, polymer, refining and foundry coating systems.
Each grade has its own datasheet, typical properties and application guidance.
Salt water gel that builds viscosity and suspension in seawater and saturated brine, tested batch by batch against API 13A Section 12.
Oil & Gas Drilling BentoniteSodium drilling bentonite tested against API 13A Section 9 limits for dial reading, YP/PV ratio, filtrate volume and coarse residue.
Drilling Fluids BentoniteFinely ground OCMA-grade drilling bentonite tested to API 13A Section 11, with residue above 75 µm held at 2.5 % or less.
Drilling Fluids Bleaching EarthA more strongly activated clay for dark crudes, mineral oils and waxes where standard grades need excessive dosage.
Mineral Oil Purification BentoniteHigh-swelling foundry bentonite that bonds silica sand into strong, permeable green sand moulds for ferrous and non-ferrous castings.
Green Sand Mold Strength Calcium CarbonateFinely classified ground calcite for formulations where gloss, smoothness and mechanical properties depend on particle size.
High-quality paints and plasticsOur minerals form the invisible backbone of modern infrastructure — improving performance, durability and cost-efficiency across sectors.
A legacy of quality, backed by modern processing infrastructure and rigorous laboratory control.
ISO 9001 certified processes and NABL-accredited laboratory testing. Every lot is checked for the parameters that matter to your application and shipped with a batch Certificate of Analysis, Technical Data Sheet and MSDS.
Our quality systemExport-ready packing from 25 kg bags to 1.2 MT jumbo bags, with documentation prepared for customs and your incoming QC.
Export & packagingParticle size, activation level and surface treatment tuned to your formulation, then locked into a repeatable specification.
Talk to engineering5+ manufacturing sites across Gujarat, Rajasthan, Madhya Pradesh and Tamil Nadu, with 25,000+ MTPA capacity support continuity of supply.
About usQualify a grade in your own lab before committing. We ship samples with the same documentation as production lots.
Request a samplePractical, neutral guidance for buyers and formulators.
What API 13A Sections 9, 11 and 12 cover, what each test parameter tells you, and how to choose between bentonite, OCMA-grade bentonite and attapulgite for fresh-water and salt-water muds.
Read guide 6 min readBoth clays thicken, absorb and bind, but their crystal structures make them behave very differently. A side-by-side look at properties, uses and how to choose.
Read guide 6 min readHow bentonite bonds green sand, when to use sodium, calcium or blended clay, which tests matter, and how clay control links to common casting defects.
Read guideWe manufacture and export industrial minerals — attapulgite, bentonite, dolomite, calcium carbonate, ball clay, diatomaceous earth, bleaching earth and organoclay — plus specialty chemicals such as magnesium oxide, magnesium carbonate, clay catalysts, desiccant fillers and foundry coating rheology modifiers.
Yes. We supply attapulgite to API 13A Section 12 and drilling-grade bentonite to API 13A Sections 9 and 11 (OCMA grade). Each lot is tested against the applicable requirements and shipped with a Certificate of Analysis.
Yes. Samples of standard grades are available for qualification trials. Share your application and target specification through the quote form and our technical team will recommend a grade and arrange a sample with its datasheet.
Yes. We serve customers in more than 15 countries with export-ready packaging — 25 kg and 50 kg bags or 1 MT jumbo bags — and full documentation including CoA, Technical Data Sheet and MSDS.
Share your application, target grade and volume. Our technical team replies with a matched grade, a datasheet and a quotation.
